jetcareers

Go Back   jetcareers > Career Specific > The MX Hangar (A&P/AMT)

Closed Thread
 
Thread Tools Display Modes
Old August 10th, 2006, 23:18   #1
jrh
Old Skool
 
jrh's Avatar
 
Join Date: Apr 2005
Location: USA
Posts: 1,769
Default What am I getting in to...

I'd like to hear your thoughts from an A&P perspective on a situation I'm getting in to:

I have an opportunity to flight instruct in a C-150 at a small, private grass strip. Because of some issues with insurance, the plane has only flown 6 hours in the last 4 months, and hadn't flown at all in the year prior to that.

It is stored outside, but looks to be fairly well cared for. It has good tie-down ropes, window covers, a pitot tube cover, air intake covers, nice interior, nice avionics, etc. I looked through the maintenance logs and everything seems to be in order, considering how little it has flown. The last three records, spread over the past two years, were for two annuals and a transponder check. In other words, it hasn't been looked at much, but that's to be expected, considering it hasn't been flying.

Something that concerns me are a few comments made by the private pilot/primary renter of the plane who was showing me around. He mentioned they use a regular air compressor to fill the nose strut. When I said I thought nitrogen was supposed to be used, he said, "Yeah, that's what I thought too, but the mechanic said air was 80% nitrogen anyway, so just use air, so that's what we've been doing."

When I noticed in the cockpit that there was no compass deviation card under the magnetic compass, the guy showing me around said, "I'm not sure about that...the mechanic has signed off on two annuals with it like that, so it must be ok."

It's not so much the specific problems that I saw as it is the mechanic's response to them that bothered me. But I'll be the first to admit I'm a pilot, not a mechanic, so I don't know what to think. Am I being too picky? Or is this mechanic cutting corners?

Also, aside from this issue, what should I be aware of with a plane that has been stored outside and only flown 6 hours in the past 18 months? Is there anything I should be especially careful with during my first few pre-flights? In case you're wondering about the climate, this plane is in eastern Pennsylvania.

Thanks for your help.
jrh is offline  
Old August 10th, 2006, 23:30   #2
desertdog71
Old Skool
 
desertdog71's Avatar
 
Join Date: Feb 2006
Location: KIDP/KCNU
Posts: 3,008
Send a message via AIM to desertdog71
Default Re: What am I getting in to...

Sounds like you are preparing for Freight Dawg duty
__________________
www.flywhiteair.com
http://www.myspace.com/desertdog71


Following message is for SkyCougar.
Took my chances on a big jet plane, Never let them tell you that they're all the same.
desertdog71 is offline  
Old August 11th, 2006, 11:07   #3
USMCmech
Old Skool
 
USMCmech's Avatar
 
Join Date: May 2004
Location: Dallas TX
Posts: 1,711
Default Re: What am I getting in to...

The main thing that concerns me is the fact that it went so long without any flying. However, it seems to have been properly covered to minimize the damage.

Useing compresed air to fill struts and tires is perfectly fine unless the maint manual requires nitrogen.

A compass card is a deffinate requirement, but that's an easy fix.


Proceed with caution, but I haven't heard any showstoppers.

You can expect several mechanical issues to show up durring the next few hours. The oil should deffinately be changed every 25 hours for the next 100.

How bad is the humidity in your area?
__________________
"You may all go to Hell, I shall go to Texas"

David Crockett

http://www.myspace.com/usmcmech96
USMCmech is online now  
Old August 11th, 2006, 14:11   #4
jrh
Old Skool
 
jrh's Avatar
 
Join Date: Apr 2005
Location: USA
Posts: 1,769
Default Re: What am I getting in to...

Quote:
Originally Posted by USMCmech View Post
Proceed with caution, but I haven't heard any showstoppers.

You can expect several mechanical issues to show up durring the next few hours. The oil should deffinately be changed every 25 hours for the next 100.

How bad is the humidity in your area?
Thanks for your advice!

The humidity in the summer is fairly high. Is that a good thing or bad thing?
jrh is offline  
Old August 11th, 2006, 14:33   #5
USMCmech
Old Skool
 
USMCmech's Avatar
 
Join Date: May 2004
Location: Dallas TX
Posts: 1,711
Default Re: What am I getting in to...

High humidity can increase your odds of haaving corrosion in the engine after is sat for a long peroid of time. It is a reall problem in costal areas.
__________________
"You may all go to Hell, I shall go to Texas"

David Crockett

http://www.myspace.com/usmcmech96
USMCmech is online now  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT -4. The time now is 14:17.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0
©2008 jetcareers.com