jetcareers

Go Back   jetcareers > General > Member Announcements

Closed Thread
 
Thread Tools Display Modes
Old July 6th, 2008, 16:17   #1
ppragman
Senior Member
 
ppragman's Avatar
 
Join Date: Sep 2007
Location: Anchorage
Posts: 818
Default Had my first Booboo...

I was flying the 206 into a 1200' strip and I got the nose to high and scrapped the tail cone (actually the stinger, its on wheels but set up as a seaplane) nothing bad, purely cosmetic, but damn that's the first time in 1400TT I've ever hurt an airplane. Bent it back down so it wouldn't bind, then flew it back, went to the shop and worked the kinks out, but damn that's embarrasing, that was only the second time I've been into that strip too.
__________________
15"MP
2400RPM
Flaps - 30 degrees
Sink Rate - Pegged
Airspeed - 80kts
Fully knowing why they call it the lead sled - Priceless.
ppragman is online now  
Old July 6th, 2008, 21:51   #2
pilatus028
Junior Member
 
pilatus028's Avatar
 
Join Date: Aug 2003
Location: USA
Posts: 91
Default Re: Had my first Booboo...

you could use it again, no big deal. When I worked as a flight instructor I saw what you could call damage...and when I say damage, it hurt me just looking.
__________________
"Please don't tell Mum I'm a pilot, she thinks I play piano in a #####house."
pilatus028 is offline  
Old July 6th, 2008, 22:23   #3
ppragman
Senior Member
 
ppragman's Avatar
 
Join Date: Sep 2007
Location: Anchorage
Posts: 818
Default Re: Had my first Booboo...

Quote:
Originally Posted by pilatus028 View Post
you could use it again, no big deal. When I worked as a flight instructor I saw what you could call damage...and when I say damage, it hurt me just looking.

still, it just pissed me off that I could let it happen, let that be a lesson to me I guess, #### happens, make the best of it, and don't get cocky. What bothered me most is that it was a revenue flight.
__________________
15"MP
2400RPM
Flaps - 30 degrees
Sink Rate - Pegged
Airspeed - 80kts
Fully knowing why they call it the lead sled - Priceless.
ppragman is online now  
Old July 6th, 2008, 22:52   #4
Polar742
Senior Member
 
Polar742's Avatar
 
Join Date: Mar 2008
Location: Rockledge
Posts: 1,299
Send a message via AIM to Polar742
Default Re: Had my first Booboo...

Just a FYI:

I'd use some discretions posting somethings on the innerweb, especially now that the FEDS are in enforcement mode.


__________________
Hey! It's all ball bearings nowadays. Now you prepare that Fetzer valve with some 3-in-1 oil and some gauze pads. - Irwin M Fletcher
Polar742 is online now  
Old July 6th, 2008, 23:01   #5
CirrusMonkey
Senior Member
 
CirrusMonkey's Avatar
 
Join Date: Oct 2006
Location: Knoxville, TN.
Posts: 372
Default Re: Had my first Booboo...

Ha! Amature!! I had my first boo boo on December 2nd, 1975. About 45 minutes after I was born!
__________________
Even saw the lights of the Goodyear Blimp and it read Dwight Shrewt is a pimp!
CirrusMonkey is offline  
Old July 6th, 2008, 23:39   #6
bdhill1979
Old Skool
 
bdhill1979's Avatar
 
Join Date: Aug 2006
Location: U77
Posts: 2,443
Send a message via Yahoo to bdhill1979
Default Re: Had my first Booboo...

Quote:
Originally Posted by CirrusMonkey View Post
Ha! Amature!! I had my first boo boo on December 2nd, 1975. About 45 minutes after I was born!
you waited that long?
__________________
Commercial Pilot, IR
Gold Seal CFI, CFII
TT: 1150ish
Part 91 Company pilot
4 year Degree

Will fish for pay
bdhill1979 is offline  
Old July 7th, 2008, 00:45   #7
ppragman
Senior Member
 
ppragman's Avatar
 
Join Date: Sep 2007
Location: Anchorage
Posts: 818
Default Re: Had my first Booboo...

Quote:
Originally Posted by Polar742 View Post
Just a FYI:

I'd use some discretions posting somethings on the innerweb, especially now that the FEDS are in enforcement mode.


not an accident or an incident, nothing outside the ordinary, standard wear and tear, still I don't want to abuse the airplane, its just as bad as being hard on the brakes. If I would have torn the tail off...welllllllll then you can bet that wouldn't have been on JC
__________________
15"MP
2400RPM
Flaps - 30 degrees
Sink Rate - Pegged
Airspeed - 80kts
Fully knowing why they call it the lead sled - Priceless.
ppragman is online now  
Old July 7th, 2008, 08:13   #8
mikecweb
Old Skool
 
mikecweb's Avatar
 
Join Date: Oct 2005
Location: KBOS
Posts: 2,871
Send a message via AIM to mikecweb Send a message via Yahoo to mikecweb Send a message via Skype™ to mikecweb
Default Re: Had my first Booboo...

Quote:
Originally Posted by ppragman View Post
not an accident or an incident, nothing outside the ordinary, standard wear and tear, still I don't want to abuse the airplane, its just as bad as being hard on the brakes. If I would have torn the tail off...welllllllll then you can bet that wouldn't have been on JC
Naw I'd listen to polar on this one.
Just friendly advice take it or leave it.
__________________
Why run a company when you can destroy it - George Gonzalez
When three failed airlines on a resume just isn't enough.
mikecweb is offline  
Old July 7th, 2008, 10:15   #9
WacoFan
Senior Member
 
WacoFan's Avatar
 
Join Date: Dec 2007
Location: KC
Posts: 1,016
Default Re: Had my first Booboo...

Quote:
Originally Posted by mikecweb View Post
Naw I'd listen to polar on this one.
Just friendly advice take it or leave it.
Perhaps in the future you should post something like this that happened to a "friend". Like...my friend scrapped the tail of a 206 going into a short field...
WacoFan is offline  
Old July 7th, 2008, 10:54   #10
mikecweb
Old Skool
 
mikecweb's Avatar
 
Join Date: Oct 2005
Location: KBOS
Posts: 2,871
Send a message via AIM to mikecweb Send a message via Yahoo to mikecweb Send a message via Skype™ to mikecweb
Default Re: Had my first Booboo...

Quote:
Originally Posted by WacoFan View Post
Perhaps in the future you should post something like this that happened to a "friend". Like...my friend scrapped the tail of a 206 going into a short field...
I think it's more the I just bent it back and went on my way.
__________________
Why run a company when you can destroy it - George Gonzalez
When three failed airlines on a resume just isn't enough.
mikecweb is offline  
Old July 7th, 2008, 11:24   #11
CirrusMonkey
Senior Member
 
CirrusMonkey's Avatar
 
Join Date: Oct 2006
Location: Knoxville, TN.
Posts: 372
Default Re: Had my first Booboo...

Quote:
Originally Posted by bdhill1979 View Post
you waited that long?
Hey, cut me some slack. It was awkward enough!
__________________
Even saw the lights of the Goodyear Blimp and it read Dwight Shrewt is a pimp!
CirrusMonkey is offline  
Old July 7th, 2008, 14:30   #12
ppragman
Senior Member
 
ppragman's Avatar
 
Join Date: Sep 2007
Location: Anchorage
Posts: 818
Default Re: Had my first Booboo...

You're right, just a little nervous after word, had to tell somebody, mods, if you would, do me a favor and bury the thread
__________________
15"MP
2400RPM
Flaps - 30 degrees
Sink Rate - Pegged
Airspeed - 80kts
Fully knowing why they call it the lead sled - Priceless.
ppragman is online now  
Old July 7th, 2008, 15:15   #13
SteveC
Moderator
 
SteveC's Avatar
 
Join Date: May 2003
Location: GRR
Posts: 8,630
Default Re: Had my first Booboo...

Well, I "unapproved" the pertinent posts, but to be honest it won't make a difference. The thread has almost assuredly already been archived somewhere on the 'net, and taking them out here won't change that.
__________________
.


If life gives you lemons, throw 'em into a quart of vodka. ~Red Green
SteveC is offline  
Closed Thread

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT -4. The time now is 23:51.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0
©2008 jetcareers.com