jetcareers - View Single Post

averyrm · November 14th, 2007, 17:32

Set the lead in radial - turn towards the VOR if the number gets bigger, hold heading if it gets smaller.

Some of these seem really complicated, it's a DME arc not an ILS - if you're keeping it within 0.5 nm you're within the error of the system itself.

November 14th, 2007, 17:32	#37
averyrm Old Skool Join Date: May 2002 Location: LCK Posts: 1,653	Re: DME Arc Techniques Set the lead in radial - turn towards the VOR if the number gets bigger, hold heading if it gets smaller. Some of these seem really complicated, it's a DME arc not an ILS - if you're keeping it within 0.5 nm you're within the error of the system itself. __________________ <-- That guy with Belushi as his avitar